Overview
This guide assists in installing the FUYL Kiosk Mount. The FUYL Kiosk Mount is designed to be attached to the FUYL Locker and securely house the iPad that will be used as the FUYL Locker interface.
Prerequisites
FUYL Locker Physical Installation
Follow the FUYL Locker Physical Installation guide to set up a FUYL Locker.
Power & Networking Requirements
Ensure the locker is situated near a second outlet (in addition to the FUYL Locker's) to provide power to the FUYL Kiosk iPad. If the iPad selected is sold without an appropriate USB-C wall charger one will need to be supplied to connect to the included iPad charging cable.
The FUYL Kiosk will also need sufficient access to WiFi in order to operate.
Included Hardware
The FUYL Kiosk Mount is available in 2 versions, suiting either a 10th-11th Generation or a 7th-9th Generation iPad.
Each kit includes:
- iPad Storage & Mounting Hardware
- Allen key
- 3m charging cable (USB-C to USB-C or USB-C to Lightning)
- Handle removal tool
- 8 x M6 bolts
- 2 x M5 bolts
- Keys
- Rubber grommet
- Cable management accessories
- Printed Installation Instructions
Installation Video
The following video illustrates the installation process described in the next section:
Process
Prepare the components
Some items are shipped attached to ensure safety in shipping. Please unscrew/detach them in preparation for installation.
Remove the existing handle from your FUYL Locker
Attach the mount support to the FUYL Locker access door
Install the iPad holder and route the iPad charging cable through the door
Installing an iPad
10th - 11th Generation iPads
7th - 9th Generation iPads
Route and organize the iPad charging cable using the supplied accessories
Close and lock the side access door, & connect the iPad cable to the power adapter and outlet.
Next Steps
See the guide to Installing and Configuring the FUYL Kiosk App
See the guide to Setting up a FUYL™ Smart Locker with the FUYL™ Kiosk
See the guide to Migrating to FUYL Enhanced from FUYL Classic (formerly Essentials & Advanced)