Onboarding the FUYL Locker

Overview

The onboarding application on your FUYL Locker will assist you in connecting it to the LocknCharge Cloud, updating firmware, and utilizing diagnostic tools for network troubleshooting.

Before onboarding your FUYL Locker, ensure you have the following

• The Account Code
• The LocknCharge Cloud temporary login details
• An ethernet cable (Included in the accessories box)
• Knowledge of your network configuration and the FUYL Locker's network requirements

To onboard your FUYL Locker follow these steps:

Get the Portal address

1. Power on the locker Plug in your FUYL Locker to a power outlet and check the display screen is on.
2. Update the firmware if asked You may be asked to update the firmware of a locker before it can be onboarded. It is recommended to both update this firmware and configure automatic updates for all lockers for ongoing security and reliability.
3. Connect the ethernet cable Retrieve the Portal address from the locker by connecting it to the network with an ethernet cable. The process to retrieve the locker's portal address depends on your intended network configuration.
   1. Ethernet (DHCP): Connect the locker to your network using an ethernet cable.
   2. Ethernet (Static) or WiFi: Connect the locker to an available configuration device (such as a laptop) via an ethernet cable, then restart the locker.
4. Open the admin menu After connecting the ethernet cable, enter the administration menu on the FUYL Locker display by pressing “00” on the keypad and then “OK”.
   Note: On newer firmware versions, you won't be able to see "00" being displayed. This is normal.
5. Enter the default PIN Enter the default PIN: 31082018
6. Find the Portal address Select System Status (option 2), then Network Status (option 1)

Run the onboarding wizard

7. Open the Onboarding Portal Open a web browser on a laptop or computer and enter the Portal Address shown on the FUYL Locker display.
   Note: Some browsers will report a security warning, which appears because the locker has generated a self-signed certificate to secure your connection. It is safe to bypass security certificates or privacy warnings in this case, but should you have a concern please contact support for more information.
8. Log in Enter the default login credentials:
   Username: admin
   Password: 31082018
9. Follow the onboarding wizard The onboarding wizard will guide you in connecting your locker to the LocknCharge Cloud:
   1. In the Network Configuration step your locker can be changed from the default DHCP ethernet settings or connected to a local WiFi network.
   2. In the Internet Connection step your locker will perform a series of tests to ensure it has the necessary external access to be connected to your LocknCharge Cloud.
   3. In the Registration step you will be prompted to enter an account code (provided by LocknCharge) and a name to identify your locker in the LocknCharge Cloud.
10. Close the Onboarding Portal Once finished, close the Onboarding Portal

Add the locker in the Cloud

11. Log in to the Cloud Login to the LocknCharge Cloud at www.lockncharge.io
12. Select New stations found Select New stations found in the Connected Station List
13. Choose the locker and node Select the checkbox next to the locker you want to add. Then select the Node you would like to add it to. Note: If this node has already been configured, the new locker will adopt those settings immediately.
14. Move the station Select the Move station button at the top of the page, then select yes from the confirmation box.

The FUYL Locker is now connected to the LocknCharge Cloud and ready to be configured. That completes Getting Started. Continue to FUYL | Classic (without Kiosk) for the configuration guides.