Overview
This guide highlights the differences between versions of FUYL Lockers to help identify your product when seeking support.
FUYL 23 & FUYL 8
The FUYL 23 and FUYL 8 are easily identifiable by the number of bays present (23 and 8 respectively) and lack of a numeric key-pad and RFID reader.
FUYL Tower (MK2) & FUYL Tower Pro (MK3)
Our second and third revision FUYL Lockers can be identified by their black doors with perspex windows on each bay. These two revisions may look very similar at first glance, but can be differentiated with a few simple checks:
On the Locker
The locker's full serial number can be found riveted to the bottom left of the locker itself.
| FUYL Tower (MK2 & 2.5) | FUYL Tower Pro (MK3) |
|---|---|
| Serial number does not include "MK3" | Serial number includes "MK3" |
Inside the Bays
| FUYL Tower (MK2 & 2.5) | FUYL Tower Pro (MK3) |
|---|---|
| Provides USB-A power inside each bay | Provides USB-C PD power inside each bay |
Some second generation FUYL Lockers may have been fitted with a newer control door, so it's also important to differentiate between the following components if prompted by our support team. These are considered "MK2.5", though share End Of Life with FUYL Tower (MK2) products.
Control Door
| FUYL Tower (MK2) | FUYL Tower Pro (MK3) |
|---|---|
| Has a no plastic cover over the back of the control door, with a MicroSD card slot | Has a black cover/case over the back of the control door, and no SD Card slot |
Older FUYL Lockers (MK1)
The first generation FUYL Locker was available in a white finish, with a 2-line simple LCD display on the control door.
If your FUYL Locker has individual PIN pads on each bay, it may be a FUYL™ Cell. See here for support with this product.
Other FUYL Products
If your FUYL product doesn't match any of the descriptions above, please contact support for assistance in identification.